---
title: "Rubicon Weather Station"
canonical: "https://farmconnect.docs.rubiconwater.com/space/FER/1932165582/Rubicon%20Weather%20Station"
format: markdown
---
This guide covers the steps required to setup the [Weather Station](https://rubiconwater.atlassian.net/wiki/spaces/WS) on the FerIT. It is assumed that the Weather Station has been configured with the GUI, see the Weather Station manual for details.

## Requirements

1. WeatherStation and FerIT site install complete and powered.
2. [DeviceConnect (rubiconwater.com)](https://rubiconwater.atlassian.net/wiki/spaces/DC)

## Update the Timezone and Toggle Daylight Savings Time

See the [https://rubiconwater.atlassian.net/wiki/spaces/DC/pages/1914896390](https://rubiconwater.atlassian.net/wiki/spaces/DC/pages/1914896390) for details of connecting to the FerIT and configuring drivers.

1. Connect to the FerIT using DeviceConnect.
2. Navigate to the Driver tab and then to the App Driver.
3. Update the time zone and daylight savings toggle.

## Install the Driver

See the [https://rubiconwater.atlassian.net/wiki/spaces/DC/pages/1914896390](https://rubiconwater.atlassian.net/wiki/spaces/DC/pages/1914896390) for details of connecting to the FerIT and configuring drivers.

1. Navigate to the to the drivers tab
2. Add the WeatherStation Driver. The FerIT will reset.

## Configure the Driver

1. Reconnect to the FerIT.
2. Navigate to the Driver tab, then to Weather Station, and to the Weather Station Config tab.
3. Make any required changes.
4. Reset the FerIT using DeviceConnect to save the changes.