---
title: "FerIT Display"
canonical: "https://farmconnect.docs.rubiconwater.com/space/FER/1932362516/FerIT%20Display"
format: markdown
---
> Macro (toc)

# Requirements

- Android device, or PC with [Device Connect](https://farmconnect.rubiconwater.com/device-connect/)
- FerIT Solar Node with firmware version >= 1.7.0
- Access information sheet that came with your FerIT Node
  - Serial Number
  - MAC Address
  - Bluetooth Access Code
- FerIT Display

# Defaults

| **Item** | **Value** |
| --- | --- |
| Modbus Address | 70 |
| Protocol | Ascii or RTU |
| Baud Rate | 9600 |
| Data Bits | 8 |
| Stop Bits | 1 |
| Parity | None |

# Commissioning

See the [https://rubiconwater.atlassian.net/wiki/spaces/DC/pages/1914896390](https://rubiconwater.atlassian.net/wiki/spaces/DC/pages/1914896390) for details of connecting to the FerIT and configuring drivers.

1. Connect to the FerIT using DeviceConnect and add the “Sonaray, Micronlevel & Display” driver. Note that you will be prompted to log in before adding new drivers.
2. Select the FerIT Display Driver.
3. Select and **Send** the units as per the desired configuration.
4. Once all units and values are sent, trigger the **Force Set Required Config** button. The LCD screen should be updated to the required units.
5. Write the changes to flash and restart the FerIT.